Portable Air Conditioner Plexiglass Window Panel
Portable Air Conditioner Plexiglass Window Panel
Beat the heat this summer with a custom-cut clear plexiglass window panel for your portable air conditioner unit, complete with a custom exhaust hole that clips into your AC panel.
CNC cut from a durable 3/16” thickness (4.5 mm), your plexiglass insert can be made to fit any window or sliding door. It’s crystal clear, letting in the natural light while keeping hot exhaust air from re-entering your home.
Simply select the range your smaller dimension falls into from the drop-down and enter the exact height x width measurements after clicking “purchase”. For example, if your height and width dimensions are 19” H x 49” W, you can select 18” to 23” from the drop-down menu since 19” is your smaller dimension and falls into this range.
Once your order is placed, bring your diagram with measurements for your panel and drop off your AC vent kit and we’ll match the exhaust hole for your specific portable air conditioner onto your custom AC panel. You can also email your measurements and a photo of your adapter along with the make and model of your portable AC if you’d like to save yourself the trip.
Easily install the plexiglass insert for your portable AC with velcro strips, included in your order (6 ft). Using Velcro allows you to easily add and remove your plexiglass window panel whenever you like.
Each clear plexiglass panel is custom-cut to fit your space and portable AC unit. They are made-to-order and CNC fabricated in our Vancouver shop. Our turnaround is 7-9 days when your order is placed and AC Adapter is dropped off or the information is emailed.
Download our Measuring Guide complete with an example and templates. Questions, comments, or just want to say hi? Get in touch!
We order the material for your custom AC panel and begin the setup once your order is placed. We offer a store credit that does not expire in case you’d like to cancel your order.
How to Measure your Window for Your Custom Plexiglass AC Panel
To measure your window for a custom plexiglass AC panel, follow these steps:
For a casement window or a swing-out window, open the window and measure the height and width of the open area. Your plexiglass panel will sit around the edge of your window frame so you’ll want to add 0.5” to 1.5” (depending on the width of your frame) to your measurement for both the height and width as this will be the area that your velcro will go to create a tight temporary seal for your panel.
If you have handles or other obstructions, we can cut notches around them so they don’t interfere with the plexiglass panel. Simply measure the location you’ll need the notch cut. Let us know the width and height of the notch.
For a sliding window, you can add a partial plexiglass panel. Open your sliding window to the size you’d like your plexiglass panel to be. Find the height by measuring from inside the top track to the window frame edge on the bottom. It’s important not to measure inside the track at the bottom of your piece since it will make your panel too large for your window.
